PRODUCTS
ATS dual power switch cabinet is mainly used in emergency power supply system to automatically switch the load circuit from one power source to another (standby) power switch to ensure continuous and reliable operation of important loads.ATS is a mechanical structure, the conversion time is more than 100 milliseconds, will cause the load power cut.Suitable for lighting, motor load.
The automatic transfer switch derived from the load switch adopts the double-column composite contact, transmission mechanism, micro-motor pre-storage energy and micro-electronic control technology, and basically realizes zero flying arc.Drive motor for poly (neoprene insulation syndrome, equipped with safety devices in more than 110 ℃ temperature, and the current state of automatic tripping.When the fault is gone, it will be put into operation automatically, which ensures the service life of the switch to a great extent.
1. The power supply of the device is provided by circuit A, N phase voltage or external dc 9V35VDC):
2. The normal delay of main power or reserve power can be set within 0 seconds to 60 seconds).Generator start delay can be set (range 0 s ~9 s);
3. Set "main power first", "automatic/manual", "no first" and "reserve power first" through the button of the panel to ensure the excellent main power
4. Power supply, backup power supply or power supply without priority mode and maintenance;
5. When the external dc power supply is 9~35V, it has the function of starting generator signal after abnormal main power supply
Separation design of two N lines;